9% Off

300 LPD Hitech Solar

~~₹35,000.00~~ ₹32,000.00

Superior Efficiency: 94% sun tracking from sunrise to sunset and no heat loss in cold weather with vacuum insulation
Outer Body: stainless Steel
Reliable: No scaling or corrosion due to borosilicate glass
Easy Maintenance: Easy on-site cleaning of glass and tank system
Glass materials (ETC tubes) do not carry any warranty coverage
5 year replacement warranty on tanks and stands
Extended warranty available on request

Call Us Or Send Enquiry

Prices for Bangalore City limits only, EXCLUDING ALL KINDS PLUMBING WORK, Click Call for more info.

Category: Solar Hitech Tags: 300 Ltr Solar water heaters, ETC Type Solar water heater

300 LPD Hitech Solar

The Inner tank of these models are of Stainless Steel SS304 Grade, hence Hitech Solar 300 ETCPC life of the solar water is much higher than other
Glass line solar water heaters are much reliable in harsh hard water areas. Glass line is a special coating which prevents rusting of tanks due to harsh hard water conditions.
Product available in 100 Ltr, 200 Ltr, 300 Ltr and 400 Ltr and 500 Ltr capacity in ETC type systems

Hitech Solar 300 models manufactured with high standard machinery and precision technology.

Hitech Solar 300

300 LPD Hitech Solar, we are working on renewable energy with advanced technology to ensure your solar water heater gives you the maximum benefit. We use PUFF for Hitech Solar 300 LPD ETC keeping solar water hot for a long time. Hence the water is clean and hygienic as the tanks are glass enamelled coated.

With Hitech ETC type systems are to contribute making our environment pollution free and add to the green energy. Hence we are in the continuous process of upgrading our systems and machinery to international standards. To produce High-quality solar systems for your residential and commercial purposes.

The Inner tank of these models are of Staleness Steel SS304 Grade, hence Hitech Solar 250 LPD ETC life of the solar water is much higher than other

Hitech Solar

300 LPD Hitech Solar models manufactured with high standard machinery and precision technology.

At Hitech Solar, we are working on renewable energy with advanced technology to ensure your solar water heater gives you the maximum benefit. We use PUFF for Hitech Solar 250 LPD ETC keeping solar water hot for a long time. Hence the water is clean and hygienic as the tanks are glass enamelled coated.

With Hitech Solar, it’s possible to contribute to making our environment pollution free and add to the green energy. Hence we are in the continuous process of upgrading our systems and machinery to international standards to produce High-quality solar systems for your residential and commercial purposes.

Technical Specifications

Technical Details Capacity Of Tanks	300 LPD
Type	Non pressurized
Inner Tank Material	1.2mm GI (Galvanized iron)
Insulation	PUF 50mm
Outer Tank	Stainless steel
Tank Supports	MS powder coated sheet
Tank Testing	Factory pressure tested for normal systems is at 1 kg/cm²
Outer Tube Diameter	58±0.5mm
Inner Tube Diameter	47±0.5mm
Number Of Tubes	25 No’s , 2100mm
Type Of Tube Selective Coating	Graded Al-Ni with copper under coating
Tube In Tank Seal	Made of silicon rubber
Other Rubber Parts	EPDM
Configuration Of Glass Tubes	Two concentric Boro-silicate glass tube, absorptance>93%, emittance<6%(@85°c)
Area Required	N-S = 2 m , E-W=1 m

Evacuated Tube Collector Specifications:

Our ETC systems consist of tubes with borosilicate glass conforming to the ISO 3585 specification. The tube specifications are as follows

Outer Tube Diameter : 58 mm +/- 0.7 mm
Inner Tube Diameter : 47 mm +/- 0.7 mm
Tube length : 1800 mm +/- 5.0 mm
Absorber coating : Outer side of inner tube coated with three target Cu/SS/AlNi selective coating by magnetron sputtering vacuum slashing process
Absorptance > 93%, Emittance < 6 % (@ 85° C)